Larry Curtis, APLC - 300 Rue Beauregard, Building C, Lafayette, Louisiana, 70508

How to Use Jumper Cables

Firstly you need to bring both vehicles, the one with the good battery and your vehicle close to, but not touching each other, so that the jumper cables can reach the batteries. Make sure that for automatic transition the vehicle is in park and for manual the vehicle in neutral.

Open the hoods of both vehicles and locate each battery and its terminals (the + positive and – negative). Make sure that the metal ends of the jumper cables do not touch any other metal parts of the vehicle as this could cause a spark. Attach one of the positive (red) jumper cables to the positive terminal of the dead battery, make sure this is a good solid connection. At this stage DO NOT attach the black (negative) cable to anything in your vehicle and never to the negative terminal. Now attach the other red cable to the positive terminal of the vehicle with the good battery and the negative cable (black) to the negative battery terminal. Back in your vehicle attach the other black cable to an unpainted metal surface in the engine, remember NOT the negative battery terminal.

Now you are ready to start the vehicle with the good battery, let it idle for several minutes to build up the charge and then start the vehicle with the dead battery and let the two vehicles idle for a few minutes. Remove the cables starting with the negative cable in your vehicle first.

If you have been injured in an accident, or if you have lost a loved one in an accident in Louisiana, the Lake Charles accident claims attorneys of Larry Curtis Law are here to help. Please call us today at 800-836-2064 today or contact us online to schedule your free consultation.

When should I Deactivate an Airbag?

Although an airbag can be vital in saving lives, in some cases it may be dangerous to have one installed as certain groups of people can be at risk of being seriously injured.

In 1997, the National Highway Traffic Safety Administration (NHTSA) allowed auto manufacturers to cut power back in airbags by 20 to 35 percent and then in 1998, dealers were allowed to install switches in vehicles which could deactivate the airbag.

Therefore those with certain medical conditions, either the driver or the passenger can have these switches installed but only if it is more dangerous for them to have an airbag than not to.

In addition to the medical conditions, the switch can be installed for those drivers who cannot position themselves at least 10 inches from the airbag and passengers who need to put a baby in a rear facing child seat in the front seat of the car as there is no rear seat or the rear seat is too small for the car seat.

In order to have the on off switch installed you need an authorization letter from the NHTSA which has to be taken to a dealer or repair shop.

.

If you have been injured in an accident, or if you have lost a loved one in an accident in Louisiana, the Lake Charles accident claims attorneys of Larry Curtis Law are here to help. Please call us today at 800-836-2064 today or contact us online to schedule your free consultation.